Microphones, Cables & Stands

Audix UEM81C Condenser Microphone
Audix UEM81C Condenser Microphone
A pre-polarized condenser microphone, the UEM81C is used for stage, studio, video and broadcast applications. This mic s conveniently powered by one AA battery and is not dependent on phantom power for operation. The UEM81C has a clear, accurate response and is able to handle close or distant miking. With a uniformly controlled cardioid polar pattern, the UEM81C is designed to capture the acoustics of vocals or instruments while isolating it from ambient noise.

  • Live sound, recording, video
  • Overhead
  • Speech, group vocals
  • Ambient room miking
  • Acoustic instruments

UEM81C Specifications (PDF)

In Stock:Yes
Price: $199.00 

OM-2 Audix Dynamic Microphone
Audix OM-2 Dynamic Microphone
The OM2 is a dynamic vocal microphone used for a wide variety of live, home and studio applications. This mic has clear and accurate sound reproduction, resistance to feedback and ability to handle very high SPLs without distortion.

The OM2 utilizes a tight, uniform pattern which helps isolate vocals from the instruments on stage. With a wide frequency range of 50 Hz - 16 kHz, the OM2 employs a VLM™ diaphragm for a clear, precise sound with exceptional voice response.

Designed with a slight bass proximity and a tailored mid-range, the OM2 has a full-bodied sound on small to mid-sized PA systems while retaining true sound on large or professional PA systems.

  • Live Stage
  • Small venues and outdoor concerts
  • Broadcast
  • Vocals, sax, brass, guitar, dobro, flute, percussion, drums
  • Home studio

OM2 Specifications (PDF)

Base SKU:OM-2
In Stock:Yes
Price: $99.00 

F-15 Audix Condenser Microphone
Audix F-15 Condenser Microphone
The F15 is a condenser instrument microphone designed for live sound and studio applications. Characterized with a tailored frequency response of 100 Hz - 20 kHz, the F15 is ideally suited for instruments requiring detailed reproduction in mid-high and extended high end frequency ranges. A wide cardioid pick-up pattern along with high sensitivity allows for close miking as well as overhead and distance miking.

Compact and roadworthy, the F15 features a durable die cast zinc alloy body and steel mesh grill.

Low impedance and balanced output allow interference-free performance even with long cable runs. The F15 operates on phantom power of 9-52 volts.

  • Live Sound
  • Studio Applications
  • Vocals and instruments
  • Overhead miking
  • Frequency Response: 100-20KHz
  • Impedance/Sensitivity: 200 ohms/10 mV/Pa @ 1k
  • Requires 9-52V phantom power
Base SKU:F15
In Stock:Yes
Price: $139.00 

F-15 Audix Condenser Microphone
Audix F15 Condenser Microphone Kit
Enhance your Superscope recordings with the Audix F15 Condenser Microphone kit. Captures a wide sound field and transients. The kit includes one Audix F15 Condenser Microphone, Artist Series 25' XLR to XLR microphone cable and 5" tripod microphone stand.

  • Polar Pattern: Cardioid
  • Frequency Response: 100Hz - 20 kHz
  • On/Off Switch: No
  • Output Impedence: 200 Ohms
  • mV/Pascal Sensitivity: 9.3mV
  • Off-Axis: >15dB
  • Max SPL: 135 dB
Base SKU:F15-Kit
In Stock:Yes
Price: $149.00 

Audix UEM81C Condenser Microphone
Audio-Technica AT2021 Condenser Microphone
Ideal for home studio and live applications, the low-profile AT2021 offers an extended frequency response, high maximum SPL and wide dynamic range. The microphone is outstanding for acoustic guitar, overheads, piano and group vocals. Its low-mass element offers a superb transient response.

  • Ideal for acoustic guitar, overheads, piano and group vocals
  • Condenser design for studio-quality vocal and instrument applications
  • Excels in high-SPL applications
  • Extended response fro smooth, natural sonic characteristics
  • Low-mass element for superb transient response
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged design and construction for reliable performance
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Requires 48v phantom power

AT2021 Specifications (PDF)

Base SKU:AT2021
In Stock:Yes
Price: $79.00 

Audix UEM81C Condenser Microphone
Audio-Technica PRO 42 Boundary Microphone
The PRO 42’s low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO 42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

  • Very low-profile design for minimum visibility
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Uniform polar pattern for maximum rejection of unwanted sounds
  • Rugged design and construction
  • 25' cable permanently attached between microphone and XLRM-type connector
  • Requires 9-52V phantom power

PRO 42 Specifications (PDF)

Base SKU:PRO 42
In Stock:Yes
Price: $145.00 

Audix UEM81C Condenser Microphone
Rode M5-MP Matched Pair Condenser Microphones
Designed and made in Australia, the M5 is a compact ½” cardioid condenser microphone with low noise and a full frequency response. Ideal for studio recording and live on stage, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array. This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. The M5 is finished with RØDE’s proprietary ceramic coating which offers a sleek matt black finish, and is supplied with WS5 windshields and RM5 stand mounts.


  • 1/2" capsule with gold-plated membrane
  • Cardioid polar pattern
  • All metal body
  • Ultra-low noise
  • State-of-the-art surface mount electronics
  • Includes microphone clips and wind shields
  • 10 year extended warranty when you register online at www.rodemic.com/warranty
  • Requires 24V or 48V phantom power

M5-MP Specifications (PDF)

    Base SKU:M5-MP
    In Stock:Yes
    Price: $199.00 

    Audix UEM81C Condenser Microphone
    Rode SB20 Stereo Bar
    The RØDE Stereo Bar is a robust solution for mounting two microphones in a stereo array. With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RØDE Stereo Bar makes it quick and easy to achieve complex recording arrays.

    • Weight .50lb
    • Dimensions 7"H x 10"W x 3"D
    • Works great with the On-Stage SB9600 tripod studio boom stand and Rode M5-MP matched pair microphones

    SB20 Specifications (PDF)

    Base SKU:SB20
    In Stock:Yes
    Price: $49.00 

    A300BK Microphone Boom Stand
    On-Stage MS7701B Tripod Microphone Stand
    This Euro Boom Microphone Stand boasts a hybrid sheet metal and composite leg housing, making it virtually unbreakable. With a removable boom arm and its ability to fold flat, this stand is a must for every member of the band. Features a zinc mid-point clutch and black finish.
    • Steel midpoint locking clutch
    • Boom Length: 30"
    • Height Adjustment: 32"-62"
    • Base Spread: 24"
    • Optional carry bag (see On-Stage MSB-6500)

    MS7701B Specifications (PDF)

    Base SKU:MS7701B
    In Stock:Yes
    Price: $29.00 

    A300BK Microphone Boom Stand
    On-Stage MS7201B Round Base Microphone Stand
    This Round Base Microphone Stand boasts a 7lb metal base, making it less vulnerable to being tipped over. Features a zinc mid-point clutch and black finish.
    • Steel midpoint locking clutch
    • Height Adjustment: 33"-60"
    • Base weight: 7lb
    • Optional carry bag (see On-Stage MSB-6500)

    MS7201B Specifications (PDF)

    Base SKU:MS7201B
    In Stock:Yes
    Price: $29.00 

    CA300 Hard Shell Carry Case
    On-Stage MSB-6500 Microphone Stand Bag
    Heavy-duty nylon bag fits either 3 round bases, 3 hex-bases or a combination of both, plus the shafts and booms.

    The MSB-6500 comes with a heavy gauge 2-pull zipper so the bag can be unzipped length wise from the center. Two hand straps ensure a well balanced load and deluxe corded piping gives the bag its rigid shape.

    • Heavy-duty nylon
    • Bag dimensions: 36" x 13" x 4"
    • Holds up to 3 On-Stage MS7701B tripod stands and cables

    MSB-6500 Specifications (PDF)

    Base SKU:MSB-6500
    In Stock:Yes
    Price: $39.95 

    A300BK Microphone Boom Stand
    On-Stage SB9600 Tripod Studio Boom Microphone Stand
    On-Stage's most affordable and most stable studio boom combines a tripod base, two straight boom shafts, and a 7" mini boom extension into one mean microphone support machine. With fold-and-go convenience and steel tubing, this is a great item for any budget.

    • 2 Straight boom shafts totaling 82" length
    • 7" boom extension
    • 120º tripod base
    • Height Adjustment: 44-80"
    • Base Spread: 32-48"
    • Optional carry bag (see On-Stage SSB-6500)

    SB9600 Specifications (PDF)

    Base SKU:SB9600
    In Stock:Yes
    Price: $119.95 

    CA300 Hard Shell Carry Case
    On-Stage SSB-6500 Speaker Stand/Large Boom Stand Bag
    This rugged padded nylon bag provides ample room for either two speaker stands, six mic stands, or various other gear. Features an adjustable shoulder strap with metal clip for fast removal. Also includes hand straps for convenient handling.

    Two heavy gauge metal pulls are attached to the zipper so that the bag can be zipped at the center or side. All seals are crafted with corded piping that gives the bag its rigid shape.

    • Padded Nylon
    • Bag dimensions: 50" x 10" x 5"
    • Holds 1 On-Stage SBS9600 tripod studio boom stand and cables

    SSB-6500 Specifications (PDF)

    Base SKU:SSB-6500
    In Stock:Yes
    Price: $31.95 

    25' Artist Series Microphone Cable
    CBI Artist Series 25' Microphone Cable
    • 25' XLR to XLR
    • 24 Gauge Balanced Wire and Very Flexible
    • Hand Soldered Nickle XLR Jacks
    Base SKU:MM25
    In Stock:Yes
    Price: $14.00 

    50' Artist Series Microphone Cable
    CBI Artist Series 50' Microphone Cable
    • 50' XLR to XLR
    • 24 Gauge Balanced Wire and Very Flexible
    • Hand Soldered Nickle XLR Jacks
    Base SKU:MM50
    In Stock:Yes
    Price: $19.00